top of page
President Richard 2
10-meter amateur radio transceiver with AM and FM modes
Continuous frequency coverage from 24.890 MHz to 24.990 MHz and 28.000 MHz to 29.700 MHz
OEM truck-size front panel for easy use
Noise Reduction Circuit (NRC)
Automatic SWR meter with SWR protection
Voltage protection circuitry
Automatic Squelch Control (ASC) plus manual squelch
Multi-function LCD display with dimmer and frequency/channel readout
Rotary channel selector and VFO mode
S-meter and signal strength indication
USB-C front port supplying 5 V/2.1 A
Electret UP/DOWN microphone with support included
Hands-free VOX capability and talkback function
Automatic Noise Limiter (ANL), noise blanker (NB), and HI-CUT filters
Emergency channel shortcuts programmable
Echo and Roger beep functions
Public address (PA) and external speaker jack
External Vox microphone and high-power PA socket
RF power, RF gain and mic gain controls
TOT (Time-Out Timer) and key beep tone features
Dimensions approx. 7.283″ W x 7.480″ D x 2.165″ H
Operates from 13.8 V supply with 50 ohm antenna impedance
Compatible with electret and dynamic microphones
Included items: mounting cradle, screws, fused power cord, user manual

President Richard 2

SKU: TXPR134
$219.00Price
Quantity

  • This radio is not a CB radio. It will be expanded and professionally aligned (when purchased via options.) for proper TX and RX operation prior to shipment. The purchaser assumes all responsibility for ensuring lawful operation, including any required licensing, and for any use that is unlicensed or otherwise improper. Scott’s Radios LLC assumes no responsibility or liability for the operation or use of non-type-accepted radio equipment.

No Reviews YetShare your thoughts. Be the first to leave a review.

Our Policy

Returns and Refunds are generally not offered by Scott's Radios. I operate a small business and do not have a return policy like some giant online retailers.

​

If a return must be made, a 50% restocking fee will apply to the total purchase price.

I do unbox and test on camera all products returned.

Please be sure what you're ordering is exactly what you're wanting to avoid the restocking fee!

I will not ship, in good faith, a radio that is found to be defective during my testing.

​

USA Based 10-Meter Radios from Stryker, President Electronics USA, Connex, General Lee, Ranger, and Galaxy are strictly Factory Warranty Only. Customers will need to ship their radio to the designated Warranty Repair Facility.  Shipping cost is normally the responsibility of the radio owner.  

Shipping back is normally paid by the Warranty Repair Center.

Scott's Radios LLC will not, in good faith, modify any 10 Meter Radio in a way that would cause damage and lead to a premature failure.

​

Scott's Radios LLC does not offer refunds or accept any returns for any reason on the USA based 10-Meter Radios.

​

Blown Driver/ Finals, Regulators, Protection Diodes, will be considered operator error and a repair will most likely be at the expense of the radio owner.

​

10-Meter Radios from K-PO, CRT, Alinco, Superstar, and Anytone do not carry any after the sale warranty. This is not the choice of Scott's Radios LLC, but we do also accept this policy when buying these radios in bulk for resale.

Scott's Radios LLC does provide a YouTube video for all New 10-Meter Radio Sales.

Since these radios are more affordable, the customer must decide if paying more (in most cases) for a USA based 10-Meter Radio (With Warranty) is the best option for them.

​

I do recommend all in the radio hobby invest in a quality Antenna Analyzer. Most radio failures are caused by an operator using a mismatched antenna system, or questionable linear amplifier setup.

“Remember Your Antenna/Feed line” is the most important piece of any radio station.

“Avoid the myth that power is the most important factor.”

I'm are here to help in any way I can if an issue does arise.

I want all of my customers to have years of enjoyment out of all of their radio equipment.

bottom of page