Here is a video of this meter in operation with my Icom IC7300.
https://youtu.be/wtr1xZyFSsg?si=1xht5-KniLk0qP-D
Asked for by many and now added, the new K-PO DG-103MAX can now officially measure PEP on AM and SSB, just like traditional analogue meters.
On the backside of the meter is an extra 'MAX' mode switch which allows you to measure PEP (AM and SSB).
The DG-103MAX is designed to operate between 1.6 to 60 MHz with a maximum power handling of 1200 Watts. Very accurate HF meter with 5% power accuracy between 1.6 to 30 MHz.
To measure Forward Power, Reflected Power and the VSWR of analogue and digital transceivers.
All can be read out simultaneously on the large, clear, and bright digital display of the DG-103MAX.
Made by Nissei, Taiwan.
 
Electrical data
Backlight display / meter: Yes, LCD display
Impedance: 50 Ohm
Power range: 300 mW -300 Watts / 300–1200 Watts
Accuracy: ± 5%
Minimum Power for SWR: 300 mW
More
Mechanical data
Input connector: UHF (PL) female
Output connector: UHF (PL) female
Length: 5.5 inch (ca. 14 cm)
Height: 3.3 inch (ca. 8 cm)
Width: 4.8 inch (ca. 12 cm)
Inside the box
Meter: Yes
DC power cable: Yes
Installation manual: English